Multiple gas detector
Oxygen, Carbon monoxide, Hydrogen sulphide, Combustible gas

Multi gas detector for Oxygen,Combustible gas.
[GOM-3A^GOM-3AL]
  • Small/compact and lightweight with low power consumption
  • A flick of a switch provides three different measurement modes
  • With light & flow rate check function
  • Measurement of combustible gases except methane
    (for methane: GOM-3A)
  • GOM-3AL provides ppm readings for combustible gases
GOM-3A/GOM-3AL Specifications
Target gas Oxygen Combustible gas Combustible gas
GOM-3A N/A
GOM-3AL N/A
Measurement range 0-25% 0-100%LEL 0-1000 ppm
Measurement principle Galvanic cell method Catalytic combustible combustion-type method
Sampling method Diaphragm pump
Display Analog metre (backlit)
Indicating Accuracy +/- 0.5%O2 5% of full scale
Alarm threshold 18% 20%LEL 200 ppm
Alarm signal Short, intermittent sound and blinking alarm light Long intermittent sound and blinking alarm light
Power source Three size C manganese dry cell batteries for 4 hours of operation
(without alarm signal being emitted)
Three size C alkaline dry cell batteries for 8 hours of operation
(without alarm signal being emitted)
Dimensions 150(W) x 70(D) x 110(H) (mm)
Weight 1.2kg
Explosion proof Certified by Japan Ministry of Health, Labour and Welfare
(Class id3aG3 Certification No.T62340)
Return to previous viewReturn to listGo to top of page

Multiple gas detector for Oxygen, Combustible Gases,
Carbon monoxide / Hydrogen sulphide
[GOMC-3A/GOMH-3A]
  • One unit for three type of gases
  • Simultaneous measurement of oxygen, combustible gases
    (non-methane), hydrogen sulphide and carbon monoxide
  • Small / compact and lightweight
  • Low power consumption design
  • Light & flow rate check function
  • Light & flow rate check function
GOMC-3A/GOMH-3A Specifications
Target Gas Oxygen Combustible gas Hydrogen sulphide Carbon monoxide
GOMC-3A N/A
GOMH-3A N/A
Measurement range 0-25%O2 0-100%LEL 0-30 ppm 0-300 ppm
Measurement principle Galvanic cell method Combustion contact Controlled potential electrolysis
Sampling method Diaphragm pump
Display Digital LCD (backlit)
Indicating accuracy +/- 0.5%O2 5% of full scale
Alarm threshold 18% 20%LEL 10 ppm 50 ppm
Alarm signal Short, intermittent sound and blinking alarm light
Power source Four size C dry cell batteries for approx. 4 hours of operation
(without alarm signal being emitted)
Dimensions 150(W) x 70(D) x 170(H) (mm)
Weight 2kg
Return to previous viewReturn to listGo to top of page

Multiple gas detector for Oxygen, Combustible gas, Carbon monoxide, Hydrogen sulphide
[GOMHC-3A]
  • One unit for four gases
  • Simultaneous measurement of oxygen, combustible gases (non-methane), hydrogen sulphide and carbon monoxide
  • Small/compact and lightweight
  • Low power consumption design
  • Light & flow rate check function
  • Light & flow rate check function
GOMHC-3A Specifications
Target Gas Oxygen Combustible Gas Hydrogen Sulphide Carbon Monoxide
GOMHC-3A
Measurement range 0-25% 0-100%LEL 0-30 ppm 0-300 ppm
Measurement principle Galvanic cell method Combustion contact method Controlled potential electrolysis
Sampling method Diaphragm pump
Display Digital LCD (backlit)
Indicating accuracy +/- 0.5%O2 5% of full scale
Alarm threshold 18% 20%LEL 10 ppm 50 ppm
Alarm signal Short, intermittent sound and blinking alarm light
Power source Four size C dry cell batteries for approx. 4 hours of operation
(without alarm signal being emitted)
Dimensions 150(W) x 70(D) x 170(H) (mm)
Weight 2kg
Return to previous viewReturn to listGo to top of page

Multiple gas detector for Oxygen, Combustible gas, Hydrogen sulphide ,Carbon monoxide.
[GOMMH-3A/GOMMC-3A]
 
GOMMH-3A/GOMMC-3A Specifications
Target Gas Oxygen Combustible gas Hydrogen sulphide Carbon monoxide
GOMMH-3A N/A
GOMMC-3A N/A
Measurement range 0-25% 0-100%LEL 0-30 ppm 0-300 ppm
Measurement principle Galvanic cell method Combustion contact method Controlled potential electrolysis
Sampling method Diaphragm pump
Display Digital LCD (backlit)
Indicating accuracy +/- 0.5%O2 5% of full scale
Alarm threshold 18% 20%LEL 10 ppm 50 ppm
Alarm signal Short, intermittent sound and blinking alarm light
Power source Four size C dry cell batteries for approx. 4 hours of operation
(without alarm signal being emitted)
Dimensions 150(W) x 70(D) x 170(H) (mm)
Weight 2kg
Return to previous viewReturn to listGo to top of page