Gas sampling pump kit
| A slim, sleek ergonomic design for a firm grip |  |
Fully airtight inner-vacuum | |
Handle requires minimal effort | |
Quick and easy |
| Non-sparking pump body covered with elastomer sheath | |
Built-in tip breaker with diamond edge for smooth cutting of tube tips | |
Samples of 50 (half-stroke) or 100mL (full-stroke) can be drawn | |
Built-in flow finish indicator automatically shows when stroke is complete |
 |
 |
| Auto-Sampling
Counter The automatic sampling counter tells you how many pump strokes you already completed even though Gastec tubes normally do not require so many pump strokes. |
|
Handy, compact type Gas sampling pump kit
Model [GV-100S]
|
|
Shoulder-case type Gas sampling pump kit
Model [GV-100LS]
|
|
Handy, compact type Gas sampling pump kit
with pump stroke counter Model [GV-110S] |
 |
|
 |
|
 |
| The pump accessories (3 rubber inlets and lubricant) as well as the instruction sheet are provided in a convenient shoulder bag. |  |
Accessories
Measuring in manholes, storage tanks, etc.
|
Extension hose:
[No.350A（5m）]
[No.350A-10（10m）] |
|
|
 |
|
 Extension sampling hoses
|
|
Extension hoses can be attached to the tip of the gas sampling pump (Model GV-100) and used for remote downward measurement in confined spaces, such as manholes, tanks, etc. *When merely the extension hose tip needs to be replaced, simply order the Extension Hose guard rubber (No.357) only.
|
Horizontal and vertical measuring
|
Extension pole:
[No.350BP-2]
|
|
|
 |
|
 Extension sampling pole
|
|
Made of lightweight fiberglass and weighing only 590g, the extension sampling pole has a compact body (62.5 cm) for easy portability and can be extended to a maximum length of 2.8m.
|
Accurate measuring of hot gases
|
Hot probe
[No.340]
|
|
|
 |
|
 Example of a hot probe
|
|
The hot probe is a cooling device for measuring hot gases (60 to 600ºC / 140 to 1112 ºF) such as exhaust from vehicles and incinerators by cooling them down to normal temperatures. The stability of the device is enhanced when it is secured with the hot probe holder (No.345A)
Hot probe holder (Model 345A) can not be used with Twin-tubes and Oxygen tube No. 31B. |
|
Safe storage of broken tips
Tube tip holder
[No.722]
 The Tube tip holder doubles as a detector tube tip breaker and a storage receptacle for up to 260 broken tips, thereby preventing glass fragments from scattering.
|
|
Safety caps for tubes
Rubber caps
[No.DTP-1-20(blue)]
large-diameter tubes for tube nos.1HT, 1HH, 2HT, 2HH, 4HT, 31B (blue)
[No.DTP-2-20(pink)]
for all type of gas detector tubes except the above
 Reusable rubber caps can be attached to the broken edges of the detector tubes as an extra precautionary safety measure. Blue caps can be used with the largest size detector tubes (outer diameter of 7mm) and pink ones with all other tubes. One (1) package contains 20 caps.
|
|
Determining gas flow direction in smoke Smoke tester kit
[No.500]
Smoke tube （6 tubes/box） [No.501]
 Break off both ends of the smoke tube and attach a rubber squeeze bulb to one end of the tube. When the bulb is squeezed, a chemical reaction produces white smoke. This smoke makes the air flow (in ventilation systems/ducts, etc.) visible. A single tube can be repeatedly used for about 50 tests.
|
