Water pollutant detector tube systems
Enables concentrations of organic chlorinated solvents (e.g. tetrachloroethylene, trichloroethylene) present in wastewater to be easily measured
Waste water test kit
[WP-132] for trichloroethylene, [WP-133] for tetrachloroethylene
[WP-135] for 1.1.1-trichloroethane
[WP-135] for 1.1.1-trichloroethane
Alternative kits that contain the GASTEC GV-100 sampling pump instead of the plastic sampling syringe are also available: [WPT-132/WPT-133/WPT-135]
 |
Detector tubes to be used:
|
||||||
 |
|
For measuring sulphides in waste water and sludge HYDROTEC-S
[No.330]
This kit enables quick measurement (approx. 10 min.) of sulphide in bodies of water or in waste water without any special equipment and skills. Take a sample with the gas generator tube, add sulphuric acid and simply measure the amount of hydrogen sulphide generated using the detector tube.
201H / 201L
|
 |
Detector tubes for Dissolved Substances
(i.e. in solution)
To measure, simply immerse the detector tube in a sample of liquid (placed in a beaker or other container). Anyone can measure concentrations quickly, easily and accurately on site.
* Adjustment for pH is required when measuring with liquid detector tubes. |
|
Soil / Water Arsenic detection kit
[No.331]
![Soil / Water Arsenic detection kit [No.331]](images/photo_331.jpg)
This kit measures arsenic content in soil or in water. It takes about 15 minutes for the standard concentration of 0.01 to 0.5 mg/L in water. The kit requires no battery or power supply.
|
|
Soil / Water Mercury detection kit
[No.332]
![Soil / Water Mercury detection kit [No.332]](images/photo_332.jpg)
This kit measures mercury content in soil or water. It takes about 10 minutes for common concentrations between 0.005 and 0.04 mg/L in water. The kit requires no battery or power supply.
|
|
