製品情報 カテゴリ毎の一覧

Water pollutant detector tube systems

Oxygen detectorGOA-7H/GOA-7H-S

GASTEC's Oxygen detector can quickly and accurately measure oxygen concentrations at a variety of different work sites subject to host of complicated and varying factors.

*The GOA-7H-S comes with a 5 m sensor cord.

Oxygen detector

Hand-held oxygen detectorGOA-40D-5

GASTEC's Oxygen detector can quickly and accurately measure oxygen concentrations at a variety of different work sites subject to host of complicated and varying factors.
All come with a high performance galvanic cel sensor.

Gas detection in a compact body

Carbon monoxide detectorCM-9A

Employs a highly sensitive controlled potential electrolysis method used for electrochemical analysis. It is able to accurately detect even the faintest amount of carbon monoxide.

Comes with controlled potential electrolysis sensor.

Carbon monoxide detectorCM-7B

Carbon monoxide detector employs a highly sensitive controlled potential electrolysis method used for electrochemical analysis. It is able to accurately detect even the faintest amount of carbon monoxide.

Specific sensor developed for measuring hydrogen sulphide

Hydrogen sulphide detectorHS-7A/HS-7A-S

Incorporates a constant potential electrolytic type sensor, enabling hydrogen sulphide to be accurately measured.

* The HS-7A-S comes with a 5 m sensor cord.

H₂S continuous monitoring is simple, convenient and reliable.

Hydrogen Sulphide Data LoggerGHS-8AT-EX

If corrosive hydrogen sulphide is generated in the sewer system, it makes rust in the sewer and generates odours from underground.
In the worst case, the H₂S gas greatly damages buildings and facilities.
The GHS-8AT-EX data logger makes it possible for continuous monitoring in the sewer system.
Continuous monitoring is provided to watch the sewer system, corrosion of sewage pipelines and generation source of offensive odours.

• Catalogue

Hand-held Flammable gas detectorMA-2510*

*MA-2510 has been discontinued.
Explosion proof catalytic combustion type sensor

Hand-held Flammable gas detector is a small, lightweight, hand-held device for detecting the presence of flammable gas. It employs an optimized combustion-type contact sensor that enables the detection and measurement of flammable gas to guard against the possibility of explosion.

Hand-held methane gas detectorMAM-2510*

*MAM-2510 has been discontinued.
Explosion proof catalytic combustion type sensor

Hand-held methane gas detector is a small, lightweight, hand-held device for detecting the presence of methane gas. It employs an optimized combustion-type contact sensor that enables the detection and measurement of flammable gas to guard against the possibility of explosion.

Oxygen and Carbon monoxide detectorGOC-100-2

One unit performs two roles, realizing highly efficient and safe control at the same time.

One unit performs three roles, realizing highly efficient and safe control at the same time.

Multiple gas detector for Oxygen, Flammable Gases, Carbon monoxideGOMC-3A

Can simultaneously measure three gases: oxygen, a flammable gas, and carbon monoxide.

One unit performs three roles, realizing highly efficient and safe control at the same time.

Multiple gas detector for Oxygen, Flammable Gases, Hydrogen sulphideGOMH-3A

Can simultaneously measure three gases: oxygen, a flammable gas, and hydrogen sulphide.

One unit performs four roles, realizing highly efficient and safe control at the same time.

Multiple gas detector for Oxygen, Flammable gas, Carbon monoxide, Hydrogen sulphideGOMHC-3A

Can simultaneously measure four gases: oxygen, a flammable gas, carbon monoxide, and hydrogen sulphide.

One unit performs two roles, realizing highly efficient and safe control at the same time.

Multi gas detector for Oxygen, Flammable gasGOM-3A/GOM-3AL

Can simultaneously measure oxygen and a flammable gas.

The compact body permits accurate measurement of CO and CO₂ in buildings and offices.

Carbon monoxide and Carbon dioxide detectorCMCD-200

Can simultaneously measure carbon monoxide and carbon dioxide, quickly and accurately.

Carbon monoxide1HH

Measuring range : 1 - 50 % , Scale range : 2 - 50 %

• Short-term measurement detector tubes
• Explanation of the specification items

Carbon monoxide1H

Measuring range : 0.1 - 10.0 % , Scale range : 0.2 - 5.0 %

• Short-term measurement detector tubes
• Explanation of the specification items

Carbon monoxide1M

Measuring range : 0.05 - 4.0 % , Scale range : 0.1 - 2.0 % ,
Other substances measurable with this detector tube : Gasoline

• Short-term measurement detector tubes
• Explanation of the specification items

Carbon monoxide1LM

Measuring range : 25 - 2000 ppm , Scale range : 50 - 1000 ppm

• Short-term measurement detector tubes
• Explanation of the specification items

Carbon monoxide1L

Measuring range : 2.5 - 2000 ppm , Scale range : (25) - 1000 ppm

• Short-term measurement detector tubes
• Explanation of the specification items